October 20th, 2016
Flossing is one of the more overlooked (and frequently skipped) steps to good dental hygiene. Dentists agree it’s an essential part of dental care. But if it seems like your floss is getting stuck between your teeth more often than your food does, it’s tempting just to brush your teeth and skip flossing. Don’t do it!
The Academy of General Dentistry cites flossing as the most important line of defense in fighting plaque. Flossing removes plaque and food particles that a toothbrush can’t reach, which leads to fresher breath and a reduced risk of gum disease and tooth decay.
The American Dental Association recommends brushing teeth for two minutes twice a day as well as flossing (or using another interdental tool) to clean between the teeth once a day. If your floss keeps getting stuck, there are solutions to help you floss with ease.
Reasons why floss may be getting stuck between your teeth
Dental floss is thin, but it can still get wedged in between teeth. This happens more often when you are experiencing one or more of the following:
- Your teeth are set too close together.
- There is plaque build-up between teeth.
- Tooth enamel or restorative dental work has started to break down and creates uneven surfaces between the teeth.
- You use an improper flossing technique. Are you making one of these common flossing mistakes?
How to prevent floss from getting stuck
Not all dental floss is created equal. Sometimes, switching types of floss can aid in preventing it from getting stuck in between your teeth.
Unwaxed dental floss, made of nylon fibers, is more likely to get stuck, shred, or break while flossing. Waxed dental floss is sometimes thicker because of the wax coating, but the wax also enables it to glide more smoothly between teeth.
Polytetrafluorethylene floss is another synthetic floss that is stronger than most conventional waxed or unwaxed varieties. It is also slick, which allows it to slide easily through the tight spaces in between your teeth.
Proper flossing technique
If your dental floss routinely gets stuck between your teeth, you might need to adjust your flossing technique to make flossing easier and more effective.
No matter what type of dental floss you choose, start with a strand about 18 inches long. Wind most of the length around your two middle fingers, leaving just a couple inches between your hands. Pull the floss tight, holding it taut with your index fingers and thumbs.
Use a gentle sawing motion to guide the floss between your teeth, moving it up and down. When the floss reaches the gum line, bend the floss into a C-shape around the tooth, allowing the floss to reach all the way to the base of the tooth.
Still working gently, scrape the floss against the base of the tooth, working on one side of one tooth and then moving to the side of the adjacent tooth.
Continue to use the up and down sawing motion, as you move, and be gentle! Keep the floss taut against the surface of your teeth to remove plaque, and avoid letting the floss dig into the gums, which can cause irritation, redness, and bruising.
After each tooth, unwind a clean section of floss from your fingers. Make sure to get into each crevice between the teeth, including the hard-to-reach teeth in the back of your mouth! When you're finished flossing your entire mouth, remember to rinse well to remove any leftover bits of plaque or debris.
If you're going to make an effort to floss, follow proper flossing technique to prevent your floss from getting stuck in the tight spaces in your mouth. Your teeth will thank you!
If you continue to experience problems flossing, visit Water Tower Dental Care! We can take a look at your teeth to see if there are any serious issues causing flossing to be difficult for you and teach you the proper way to floss in person.